Hi! I need help I was not able to find anywhere. I am new to forum so am not sure I am even sending this to the right place.
I have used Avast successfully for yrs and it updated fine until just recently (past wk or so) I noticed it wasn’t updating. That was version 4.8 I believe. I didn’t have time to ck out, but then Windows Security Alert popped up today saying Avast was out of date which it isn’t.
I have uninstalled Avast 4 and I dl and installed Avast 5.0.462, but that didn’t solve the problem either. It scans and the icon in task bar says “my system is secure”. However it will still not update.
Not sure if this is relevant but about 2 months ago I switched from dial up (aol) to Verizon mobile wireless broadband and it was working fine for over a month but now wonder if that had something to do with. Or if the last Windows update did!
In the settings I have unchecked dial up and didn’t ck that I was always on line either but didn’t ck that I am always on line either. I use IE to connect so that is what is marked in the proxy section. Could something with these settings either in Avast or IE8 be the problem?
Can you please help?
I just tried today to manually dl the updates twice getting this same error message. Once I dl’d bbefore I changed settings to update manually and then afterward, but I got the same error message both times,
“Update is already running, could mean internet connection problem. If your computer is connected to Internet and you are using a 3rd party firewll (not Windows firewall) check if process avast setup has allowed access to the internet. If you don’t have internet connnection set avast to manual. Then try to end process. avast setup using task manager and dl program again.”
I only have Window firewall.
When I place cursor over icon in task bar it says system is secure. Once I uninstalled and installed Avast 5. 0.507 Windows Security Alert window has not come up since, but I have not rebooted either however I still can’t update either automatically or manually. This is serious!
Thank you, Brit
Please reboot and try again.
asyn
Well technically the WSC is correct as you had 5.0.462 and the latest version is 5.0.507, now you have done that, hopefully that issue is resolved.
You don’t mention what the virus definitions version is, latest is 100420-1 ?
You have to reboot after the reinstall/update to 5.0.507 as many elements may not work until after a windows restart, so reboot as Asyn suggested.
After a reboot try a manual update a little while after windows has started as avast checks for updates once a connection has been established. Try any sooner and you may bump into the avast update is already running error.
If the manual update error is displayed, check the Task Manager and see if avast.setup is already running, if so it looks like an auto update is being attempted at the time (or has stalled).
But lets reboot and see what happens after that.
Look at the file C:\PROGRAM FILES\ALWIL SOFTWARE\AVAST5\SETUP\SETUP.LOG and see what it says. I have a support ticket into Alwil and I noticed the following:
23:17:55 nrm/fil File C:\Program Files\Alwil Software\Avast5\Setup\setup.ovr not writable. Error 0x00000020
I’ve checked the permissions and even granted myself the permissions to the file (my account is an admin account).
I’ve tried updating with both my account as well as the admin account and this error keeps popping up in the setup.log file. Not sure if that’s why it won’t update from .492 to .507 or not. Once I hear something back from support, I’ll let you know.
Well windows file system error 20 = The system cannot find the device specified.
This assumes that this is a windows file system error.
The avast self-defence module would I believe block write access to this file regardless of the permissions that you set/granted.
Are you trying to do an off-line VPS update ?
e.g. downloading the complete virus definitions file, from http://www.avast.com/download-update
If so that would require that you temporarily disable the self-defence module.
I was trying to do an update through the Avast interface in the Update section.
Then that error number is weird or not a windows file system error.
It may be best to do a clean reinstall to the latest 5.0.507 version:
Download the latest version of avast, 5.0.507 http://www.avast.com/free-antivirus-download and save it to your HDD, somewhere you can find it again (if you didn’t save your last download). Use that when you reinstall.
- Download the avast! Uninstall Utility, aswClear5.exe find it here and save it to your HDD (it has uninstall tools for both 4.8 and 5.0).
-
- Now uninstall (using add remove programs, if you can’t do that start from the next step), reboot.- 2. run the avast! Uninstall Utility from safe mode, first for 4.8 if previously installed and then for 5.0, once complete reboot into normal mode.- 3. install the latest version, reboot.
Actually, I run the Internet Suite and when I download that, I get the .492 version. I’m currently working with the support group on this one. Someone else pointed me to the multi-lingual version of the Internet Suite and when I tried that, my issue was fixed, but I wonder if when the engine gets updated again, will I run into this issue once more? I really need to figure out why this didn’t work, so that’s why I’ll update everyone once I get something from support.
OK, try this direct link for AIS: http://files.avast.com/iavs5x/setup_ais.exe that may well be the latest version.
I am still unable to get updates. I have uninstalled numerous times and reinstalled 5.0.507 and rebooted. I uninstalled from Add/Remove as the other uninstall didn’t work. I checked the folder and all was gone.
I also dl’d the updates from Avast on line. 100420-1 but now these are out of date as it tells me the current version is 100414-1. Where do I get these daily updates?
The program appears to work but to update which again has my Windows Security saying it is out of date. When I click on it to update the gold color in that bar comes up but then nothing happens.
Am I protected while on line like this?
Where can I get daily updates until this gets resolved. I have been in contact with Avast tech’s help to no avail thus far.
I just got rid of a big pain-dial up-- and now–his is really annoying.
Thanks much for your help.
From what you are saying I get the impression you didn’t follow the steps exactly.
Try a repair of avast. Add Remove programs, select ‘avast! Anti-Virus,’ click the Change/Remove button and scroll down to Repair, click next and follow. This has in the past resolved this out of sync issue between reported and actual virus definitions version (certainly in 4.8 ).
However, if as your post implies you use the uninstall utility first, assumes that you mean the Uninstall Utility, as the other uninstall.
I uninstalled from Add/Remove as the other uninstall didn't work.
If that is the case and you also ran it from normal mode then the self defence module would block it.
That is why you should first use add remove programs and then the uninstall utility from safe mode (to ensure there are no remnants of either 4.8 or AIS 5.0) first for avast 4.8 and then for AIS 5.0, reboot and then install AIS.
The utility from Avast site or whereever to uninstall wouldn’t work therefore I used the Windows Control panel, add/remove to uninstall everytime. When I did that it removed icon from the task bar and all files from the Awil folders except an old Avast setup exe from 2005. All else had been removed.
- Should I have a file “aswUpd Sv.exe?” for Avast 5? If so I don’t.
I have done this so many times I am ready to scream. Can you please tell me step by step how to uninstall again and whatever it is you are saying about doing in “safe mode.” I don’t understand at all? - I need step by step instructions to do so in safe mode as this scares me.
- Are you saying that I need to uninstall and then reinstall again?
- I only have avast 5.0.507 which I have installed and uninstalled 3 times now.
Please send me thorough step by step instructions if you think this will end this problem.
I am getting confused and worried about whether I am being protected or now! Thank you, Brit
What do you mean wouldn’t work, e.g. what errors were displayed, etc. ?
Windows has two modes, normal boot mode and a safe mode, which loads minimal applications and drivers. avast isn’t loaded in safe mode so the uninstall utility shouldn’t be blocked by the avast self-defence module, the whole point of saying it has to be run in safe mode.
- Booting into safe mode http://www.pchell.com/support/safemode.shtml
You need to follow the instructions that I gave in the order that they were given in Reply #6 above.
thank you for your patience! I will try to follow you directions and just uninstall again as directed in #6 reply. I am not real efficient on here so I hope this causes me no more problems. I had hoped there would be a simple adjustment.
When I get this done I will let you know one way or the other. Thanks much, Brit
4-23-10 Help!!!
- I have followed exactly followed all your instructions and have uninstalled both Avast 4.8 and Avast
5.0.507 in Safe Mode using the Uninstall Utility. Then I reinstalled with exactly the same result. Avast
automatic update will not work. - Again, I can not manually update.
- I have dl’d todays update from avast.com/download-update to the desktop. When I try to update and
have set Avast to manual update I again get the same error message as before: “avast! Updater is
already running, that could mean interntet connection problem. If your computer is connected to internet
and you are using a third-party firewall (not Windows Firewall), check if process avast.setup has
allowed access to internet. If you don’t have internect connection, set avast updates to manual. Then try to end process ‘avast.set.setup’ using the Task Manager and run this program again.”
The Avast icon in task bar shows a yellow triangle with exclamation point in it and says when cursor hovers over that system is not protected. - I suspect the problem may be with settings, because like I initially said, I had for yrs and never had a
problem then suddenly during the first or second wk in April it quit automatically updating. I still wonder if the Microsoft update had something to do with it because it had been working and that
was the only change made. - Also how should the settings be in Avast for the internet? Although I have broadband recently started
using Verizon mobile wireless connection. I am not always on line which is one choice; but I have to get
on to the internet similarly to when I used dial up----Meaning I have to plug in a device similar to a sm
flash drive to the pc, open some installed (VZAccess Manager)window and wait for it to recognize all
then finally connect. Then once I am connected I open IE8. So should setting remain on dial up
connection? - Now I am further upset after redoing all this again as I don’t recall how I finally was able to get the dl’d
update to work before when I had exactly the same problem as I do now. - My conclusion is somehow something with internect connection is where the problem lies.
- What does proxy settings mean?
- Under “Troubleshooting” in “redirect settings” http (port)s 80…is that ok?
- Until this gets resolved I do need to know how to be able to manually install the updates and that
isn’t even working again. ( I did get it to work somehow finally before but I forgot how I did it)
I am really getting beyond frustrated!! Am I even covered from virus?
Thank you for continual help, Brit
:-[Ok! I have figured out how to manually update. And the the update showed as 100423-0 instead of the 100414-1.
This morning I opened Avast to update and again it acts like it wants to dl but nothing happens however instead of just say" Initializing 1/2" It said DL file servers.def .vpx but again nothing happened or at least the bar never moved in over 10 mins.
This may be irrelevant but something to do with this Verizon wireless broadband connection makes my time 2 hrs behind and I have to change it while I am on line.
I have seen no replies to my last summary. Does this mean you have given up?
Thanks much, Brit
If your installation is not working accordingly, repair it (through Control Panel) or even install avast from the scratch.
:(I have installed and uninstalled the latest version of Avast 5 and have done so also in safe mood using the Avast Uninstall Utility 4 times now plus chose repair from Change/Remove. That makes no difference except to consume time.
I have never gotten any error messages etc except when I tried to manually add the updates which I have figured out that out myself and at least that works. But with the lg file that grows daily it is a real pain and time consuming to be dl’ding then rebooting each time much time.
Until you can come up with some other idea other than to keep uninstalling and reinstalling which I find an unnecessary waste of time. What good is uninstalling and reinstalling another time going to do?
The program acts like it tries to install but the “over all progress” yellow bar appears and just freezes. The programs seems to be blocked from receiving from Avast site or I doubt it would say it was updating the dl file: server.def.vxp.
What are things that could be blocking or preventing? Thats apparently where the problem lies for me not rebooting and installing and reinstalling endlessly!
I have really so appreciated this program for about 8 yrs with no problems except the last Avast false positve months ago episode that I was able to thankfully recover from with on site directions to repair with all working fine.
I do hope and pray for your patience, enlightenment and a quick solution as to what is going on for all who are having this related problem.
thank you very much, Brit