avastsvc.exe high CPU usage

bob3160 · 2014-09-14T15:06:24.000Z

jeff-at-igram.org post:27:

Hello everyone,

I just tried this solution and it worked for me.

I am running Windows XP and my webShield.ini is at:
C:\Documents and Settings\All Users\Application Data\AVAST Software\Avast

I disable Avast Until Reboot, edited the file, and restarted. Avast’s CPU usage is at zero and it’s still happy.

Thank you for the help!

Edited what ??? What changes did you make???

CraigB · 2014-09-14T15:12:02.000Z

bob3160 post:28:

Edited what ??? What changes did you make???

See Asyn’s post “23” for the changes Bob.

bob3160 · 2014-09-14T15:23:04.000Z

CraigB post:29:

bob3160 post:28:

Edited what ??? What changes did you make???

See Asyn’s post “23” for the changes Bob.

Thanks, I missed that.

CraigB · 2014-09-14T15:47:14.000Z

NP’s

Asyn · 2014-09-20T15:14:36.000Z

jeff-at-igram.org post:27:

Hello everyone,

I just tried this solution and it worked for me.
[…]
Thank you for the help!

You’re welcome.

system · 2015-03-23T01:56:41.000Z

You guys rock. I know this is an old thread but, I had to say thank you.

Anyone knows if this edit will survive future updates? …or will I have to edit the webshield.ini after each update?

DavidR · 2015-03-23T14:31:01.000Z

indest post:33:

You guys rock. I know this is an old thread but, I had to say thank you.

Anyone knows if this edit will survive future updates? …or will I have to edit the webshield.ini after each update?

It should survive the update, if it is an update in-place and the update done from the avastUI. It should also be OK if you do an install over the top of your existing avast version.

The doubt would be if you did a clean reinstall, if the webshield.ini was replaced.

system · 2015-03-30T14:23:20.000Z

Hey guys, I’ve been trying to update the WebShield by adding “[General] UseStreamFilter=0”. I disable avast for 10 minutes, add the 2 lines to the webshield, save the document, an avast popup asks if I want to make the change, I click yes, I (try) to save the document, then I get another popup that says “access denied”. I’m logged in as admin, running windows 8 on a Surface Pro 3. Any ideas?

DavidR · 2015-03-30T14:34:40.000Z

englishpatient post:35:

Hey guys, I’ve been trying to update the WebShield by adding “[General] UseStreamFilter=0”. I disable avast for 10 minutes, add the 2 lines to the webshield, save the document, an avast popup asks if I want to make the change, I click yes, I (try) to save the document, then I get another popup that says “access denied”. I’m logged in as admin, running windows 8 on a Surface Pro 3. Any ideas?

Disabling avast for 10 minutes won’t cut it as that is disabling only the scanning protection, but it won’t stop the avast Self Defence module from protecting avast itself.

AvastUI > Settings > Troubleshooting and disable the avast Self Defence module. Now you can run notepad as admin, open the avast WebShield.ini file and do the edit.

system · 2015-04-02T18:55:34.000Z

That worked! Thanks!

DavidR · 2015-04-02T20:00:24.000Z

englishpatient post:37:

That worked! Thanks!

You’re welcome.

Alpha-UMi · 2015-04-02T22:26:16.000Z

Just for curiosity, what exactly does the option “UseStreamFilter=0” do? I suppose it disables the Stream Filter, but what is this Stream Filter and how does it affect the web navigation?

I have the same CPU problem while watching online videos. After adding this option, the CPU is always at 100%, but the videos seem less laggy.

DavidR · 2015-04-02T23:32:23.000Z

Alpha-UMi post:39:

Just for curiosity, what exactly does the option “UseStreamFilter=0” do? I suppose it disables the Stream Filter, but what is this Stream Filter and how does it affect the web navigation?

It reverts to the old method of streaming the data being scanned as it is downloaded. I don’t believe it makes any difference to actual web navigation.

Alpha-UMi post:39:

I have the same CPU problem while watching online videos. After adding this option, the CPU is always at 100%, but the videos seem less laggy.

Two things which you don’t mention: ?

your OS as the “UseStreamFilter=0” isn’t supported on XP or Vista as you would still be using the old method.
what version of avast 2015.10.2.2215 being the latest.

Alpha-UMi · 2015-04-03T08:28:40.000Z

Thank you for the info about the Stream Filter, DavidR!

About your questions:

XP SP3 - So for me that option doesn’t make any difference!
Latest version, 2015.10.2.2215

I’ve disabled all the protection for a test, and my CPU still goes to maximum almost instantly when flash player is involved in some way. So, I believe avast! is not the problem here. Thank you anyway!

bob3160 · 2015-04-03T12:05:33.000Z

Alpha-UMi post:41:

Thank you for the info about the Stream Filter, DavidR!

About your questions:

XP SP3 - So for me that option doesn’t make any difference!

Latest version, 2015.10.2.2215

I’ve disabled all the protection for a test, and my CPU still goes to maximum almost instantly when flash player is involved in some way. So, I believe avast! is not the problem here. Thank you anyway!

Don’t know if this applies to your situation but, you may want to try the following:
https://youtu.be/IToxyxi7tRQ
Let us know if that helps.

DavidR · 2015-04-03T13:38:30.000Z

Alpha-UMi post:41:

Thank you for the info about the Stream Filter, DavidR!

About your questions:

XP SP3 - So for me that option doesn’t make any difference!

Latest version, 2015.10.2.2215

I’ve disabled all the protection for a test, and my CPU still goes to maximum almost instantly when flash player is involved in some way. So, I believe avast! is not the problem here. Thank you anyway!

You’re welcome.

With XP - some of the new features wont work because XP doesn’t have the interface to handle them, so avast uses the existing (old) methods. Interestingly enough it is these new methods that have cause some slowdown issues, which shouldn’t be the issue here.

Hopefully Bobs youtube clip will resolve your problem.

Michael574 · 2015-07-07T16:57:55.000Z

Hi, I’ve got this same problem now and it’s really Peeing me off.

I’m running windows 8. I’ve tried looking for that “webshield.ini” file bu can’t seem to find it.

I’m not very computer savvy, so any step by step instructions on how to fix this problem will be greatly appreciated.

Thanks for your help.

system · 2015-08-08T16:21:11.000Z

Michael, you should find the answer you’re looking for in this thread on page 2.

system · 2015-08-08T17:09:56.000Z

Just by the way, I applied Bob’s fix too, which is what brought me to this thread. It worked!

Thanks.

bob3160 · 2015-08-08T17:17:51.000Z

My pleasure. Glad I was able to help.

Announcements