If you do not know then you do not have it :slight_smile:

Download Peazip to the desktop
Run and install the programme
As it installs this page will show, deselect the AVG ticks
Press decline and it will then install cleanly

https://dl.dropbox.com/u/73555776/peazip.jpg

Download the following files to the desktop … Right click the links and select save as…then select desktop

Rufus

OTLPE_standard

Right click OTLPE on your desktop and select …Open as archive

https://dl.dropbox.com/u/73555776/Unzup%20archive.png

Select OTLPE standard

https://dl.dropbox.com/u/73555776/select%20archive.PNG

Click Extract, ensure that desktop is selected

https://dl.dropbox.com/u/73555776/extract%20archive.PNG

Insert the USB stick Then run Rufus

https://dl.dropbox.com/u/73555776/rufus.JPG

Select the ISO file on the desktop via the ISO icon.

Press Start Burn

https://dl.dropbox.com/u/73555776/RufusISO.JPG

Once the USB has burnt then

[*]Download Farbar Recovery Scan Tool and save it to the flash drive.

[*]Reboot your system using the boot USB you just created.
Note : If you do not know how to set your computer to boot from USB follow the steps here
[]As the Programme needs to detect your hardware and load the operating system, I would recommend a nice cup of tea whilst it loads :slight_smile:
[
]Your system should now display a Reatogo desktop.
[]Locate the flash drive and run FSRT
[
]The tool will start to run.

http://i1224.photobucket.com/albums/ee362/Essexboy3/Farbar/FRST2.gif

[*]When the tool opens click Yes to disclaimer.
[*]Press Scan button.
[*]It will make a log (FRST.txt) on the flash drive. Please copy and paste it to your reply.