Fix for akshathabhat11

Viruses and worms
1

Please uplug your USB and do not use it until I ask.

Download attached fixlist.txt to your Desktop.
NOTE: => It’s important that both files, FRST and fixlist.txt are in the same location or the fix will not work.

Run FRST/FRST64 and press the Fix button just once and wait.
If the tool needed a restart please make sure you let the system to restart normally and let the tool completes its run after restart.

The tool will make a log on the Desktop (Fixlog.txt). Please attach it to your reply.
Note: If the tool warned you about the outdated version please download and run the updated version.

***** NEXT *****

Please download Malwarebytes AntiRootkit (MBAR) and save it to your desktop.
[i]For full instructions how MBAR works, read this article

> Doubleclick on the MBAR file (
http://www.mcshield.net/personal/magna86/Images/mbar.png
) and allow it to run.
• Click OK on the next screen, to allow the package to extract the contents of the file to its own folder named mbar.
• mbar.exe will launch automatically. On some systems, this may take a few extra seconds. Please be patient and wait for the program to open.
• After reading the Introduction, click Next if you agree.

• On the Update Database screen, click on the Update button. Once you see ‘Success: Database was successfully updated’ click on Next
• Under Scan Targets ensure all boxes are ticked. Then click the Scan button.

Notice: with some infections, you may see two messages boxes:

  • ‘Could not load protection driver’. Click ‘OK’.
  • ‘Could not load DDA driver’. Click ‘Yes’ to this message, to allow the driver to load after a restart. Allow the computer to restart. Continue with the rest of these instructions.

>> If malware is not detected, click the Exit button to close the program and post the mbar-log-year-month-day.txt and system-log.txt reports.

>> If an infection/s are found ensure Create Restore Point are ticked. Then select the "Cleanup! button to remove threats.
• The clean up procedure will be scheduled for process, pop-up will be shown.
Select the Yes button and the system should re-boot to complete the cleaning process.

>> Notice: only if an RootKit are detected, ensure to run fixdamage.exe tool located in mbar folder, \Plugins\fixdamage.exe

  • Run fixdamage.exe, at the black window to continue type Y (alias for Yes). Wait few seconds for execution …
  • When you see “press any key to exit” fix is completed, press any key to close the window. Reboot the system.

> The following reports will be created in mbar folder:

  1. mbar-log-year-month-day (hour-minute-second).txt
  2. system-log.txt

Please post both logs in your next reply.

2

Thank you so much TwinHeadedEagle and mchain too! :slight_smile: I’ve attached the reports you had asked for.

3

Hi,

I am going to need another check:

  1. Please download ComboFix by sUBs from here and save it to your Desktop.
    If you are unsure how ComboFix works please read this guide carefully.
    Note: ComboFix must be downloaded to your Desktop.
  1. Temporarily disable your AntiVirus program, usually via a right click on the System Tray icon. They may interfere with Combofix.
    If you are unsure how to do this please read this or this Instruction.

Instructions how to disable avast:

[*]Right click on the avast! system tray icon (
http://www.mcshield.net/pg/images/avast5.png
) in the lower right corner of the screen and scroll up to avast! shield controls;
[*]In the menu that appears, choose Disable Permanently. When you are prompted to turn off security, click Yes.

Note: Do not forget to turn back on this option after the cleaning by choosing avast! shield controls > Enable all shield options.

  1. Run ComboFix. Click on I Agree!

[i][size=7pt]- ComboFix will display DISCLAIMER of warranty on software.
By clicking I Agree ComboFix shall continue.

  • ComboFix will check if there is a newer version of ComboFix available.
    Click Yes if prompted to download.[/size]
    -If Recovery Console is not installed, ComboFix will offer download & installation.
    Click Yes to allow ComboFix to install Recovery Console.
  • ComboFix will scan your computer in stages, total of 50 stages.
    Do not mouse-click around while ComboFix is running.
    Note:If you see a message like “Illegal operation attempted on a registry key that has been marked for deletion” just restart your computer.
    [/i]
  1. When the tool is finished, it will produce a log report for you. (typical location: C:[b]ComboFix.txt[/b] )
    Attach log reports ( ComboFix.txt) back to topic.
4

Hey,
I’ve attached ComboFix report with this message.

5

Ok, final step :slight_smile:

Open notepad and copy/paste the text present inside the code box below:

Registry::
"AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA"=-

ClearJavaCache::

Save this as CFScript.txt

http://img.photobucket.com/albums/v666/sUBs/CFScriptB-4.gif

Close all browser windows and refering to the picture above.

Referring to the screenshot above, drag CFScript.txt into ComboFix.exe.
ComboFix will will re-run. When finished, it will produce a log for you.
Attach the contents of the log in your next reply. (typical location: C:[b]ComboFix.txt[/b] )

Please download MCShield from one of the following links:

MCShield -Official download link

[*]Double click on MCShield-Setup to install the application.
Next => I Agree => Next => Install … per installation click on Run! button.
[]Wait a few seconds to MCShield finish initial HDD scan…
[]Connect all your USB storage devices to the computer one at a time. Scanning will be done automatically.
[*]When all scanning is done, you need to post a logreport that MCShield has created.

Under Logs tab (in Control Center) for AllScans.txt log section click on Save button. AllScanst.txt report shall be located on your Desktop.

=> Post here AllScanst.txt

Explanation: USB storage devices are all the USB devices that get their own partition letter at connecting to the PC,
e.g. flash drives (thumb/pen drives, USB sticks), external HDDs, MP3/MP4 players, digital cameras,
memory cards (SD cards, Sony Memory Stick, MultiMedia Cards etc.), some mobile phones, some GPS navigation devices etc.

6

Done. :slight_smile:

7

Very good :slight_smile:

Tell me how is the situation now?

8

Perfect! :slight_smile: Thank you so much for your help TwinHeadedEagle! :slight_smile:

9

• The following will implement some post-cleanup procedures:

=> Please download DelFix by Xplode to your Desktop.

Run the tool and check the following boxes below;
[i]
http://www.mcshield.net/personal/magna86/Images/checkmark.png
Remove disinfection tools

http://www.mcshield.net/personal/magna86/Images/checkmark.png
Create registry backup

http://www.mcshield.net/personal/magna86/Images/checkmark.png
Purge System Restore [/i]
Click Run button and wait a few seconds for the programme completes his work.
At this point all the tools we used here should be gone. Tool will create an report for you (C:[b]DelFix.txt[/b])

The tool will also record healthy state of registry and make a backup using ERUNT program in %windir%\ERUNT\DelFix
Tool deletes old system restore points and create a fresh system restore point after cleaning.

10

Done. :slight_smile: