In order to uninstall Norton and install Avast, I also have to disable all the firewalls that may be running on my computer. I apologize if this is a dumb question for you - but how do I find out what firewalls I have, where they are?
You should surely know what firewall you are using? It normally has and Icon in the system tray.
If you have XP SP2 are you? Then you can check the Windows Firewall in the control panel. Or check your windows help file.
1] You don’t have to disable a firewall to uninstall Norton
2] You will only have the firewall(s) you installed. (eg Windows firewall, ZoneAlarm, Kerio or whatever you did install)
To remove NAV 2003 (and earlier) there is a remover util
To remove NAV 2004 (and later) add/remove programs and follow the instructions on the Symantec website.
For both are links here on this board
I have disabled the Norton internet security firewall in the past because I’ve been trying to figure out a way to view my own web page. Which I still can’t unless I completely disable NIS. This is one of the reasons I am switching to avast - with Norton, I am vulnerable. Of course, I suppose I could just “live with it” and forget about viewing my own webpage, or view my own posts to the newsgroup I am active in. NOT!
At one point I downloaded service pack 2 from Windows and even more problems starting popping up - so I’ll be downloading it again once I’ve switched to avast. I have, I hope, all the information I need to uninstall Norton and install avast. signing off, temporarily I hope.
If you can/can’t see your website depends a lot on where/how it is hosted. Firewall and AV software shouldn’t be causing any problems if properly setup. (that is if you run the website from your own server)
If you upload the pages to (eg:) your providers space, than they don’t matter at all. Unless you have a malfunctioning av or firewall or a really really really strange setup.
I suggest:
- first remove NAV
- install SP2
- install Avast
May want to run a scan afterwards to make sure nothing sneeked in.
Sorry Eddy to butt in,
I’ve found that The SecurityCenter (Part of SP2) is more likely to recognize avast!
as a security partner if it’s already on your computer before you upgrade to SP2.
I would therefore recommend the following order:
- first remove NAV and reboot
- install Avast reboot and then
- install SP2
I’m back! 1. unplugged the phone line
2. uninstalled norton using the add/remove in Windows
3. ran the Rnav2003 program to get the rest of it
4. ran a search for everything that contained the words symantec, or norton, or antivirus, and if it wasn’t avast, I deleted it and then emptied the recycle bin.
5. rebooted
6. installed avast
7. installed outpost firewall, and subsequently had to turn it off 'cause I couldn’t use email or ie
7. registered avast, am awaiting key so I can update
So I think I’m still without a firewall - but I can view my own web page now!
7. installed outpost firewall, and subsequently had to turn it off 'cause I couldn't use email or ieCould be because the apropiate settings for Avast weren't added yet.
7. registered avast, am awaiting key so I can updateIn the meantime you can choose the Demo button this will give 60 days unrestricted use, plenty of time to get your registration key.
In Outpost you need to allow access to ashMaiSv.exe, ashWebSv.exe and avast.setup (try a manual update and outpost should ask for permission for this, allow)
Outpost updated itself, but I was still unable to do email or even come here unless I turned it off. I think its a matter of learning the software. After updating, I got a window that says my version is outdated and I need to update to pro, which of course means $$. I’ve gathered from reading at this website and others that the pay version isn’t necessary for a stand alone home computer, right?
You can stay with the free version.
Or you can use Sygate, or Kerio, or ZoneAlarm for free.
You don’t have to use the professional version.
But, solving your problem, can you list the avast components allowed to connect into the Applications settings of your Outpost?
I had same problems with Outpost before, and no matter what steps I made to fix those problems, nothing helped. Outpost started to act like crazy sometimes… I contacted people from Agnitum, no one ever responded… the only thing that gave me back my internet connection was completely disabling Outpost.
I finally uninstalled it, removed every single registry key Outpost related, installed Sygate latest version (of course, freeware) and never ever had single problem with it. I uninstalled Sygate few weeks ago, just because I like to test some other products from time to time. Right now I’m back to ZoneAlarm freeware version and so far, it behaves as every good firewall should behave. It’s unbelievable easy to use, especially for beginners, and gives you great protection. I’m also behind my hardware router/firewall, and it works perfect with ZA and/or Sygate.
Try one of those two, and you’ll not regret. Of course, you have to completely uninstall Outpost and all traces of it in registry.
My recommendation is to go with ZA, especially 'cause I’ve noticed that you stated in your initial post that you have no clue about firewalls. ZA will give you great protection with minimal requested user interaction.
Cheers !
Rather than fight with all this, I took S.Z.'s advice. Zone Alarm is up and running. Is there a way I can test my ports and port visibility within avast or zone alarm?
www.grc.com - You are looking for shields up.
Thanks for the link, David, can’t remember if I’d ever tried that one before.
Musicmaker will be happy to know that my ZA free (with Internet protection set to High, which I think is their default anyway) scored 100 percent stealth.
I’m downloading spinrite this a.m.
slightly OT - had a scare this am. already. I had to be gone last night before telling DH about the changes to the computer (avast and ZA) He complained about being unable to connect to the i-net or email etc and I was thinking, oh great - what have I done now? Turns out the phone line was disconnected from the wall!! All is ok now though.
Why do you need SpinRite ? That’s not a program for testing your ports. It’s just happened that it’s on the same web site where you can also find ShieldsUp. That’s the one you need, and it’s online checking, you don’t have to download anything… however, linking on that web page is kind a messed up, so I suggest you use RejZor’s web page to access ShiledsUp! Many, many and when I say “many”, I really mean it… many great utilities over there…
SpinRite is Hard Disk recovery, repair and maintenance utility. See here: http://www.grc.com/sr/spinrite.htm
Use RejZor’s web site http://www.security-ops.tk and you’ll find some wonderful applications or online tests. Check under FIREWALL SECURITY CHECK section and you’ll find GRC SHIELDSUP!
This is the direct link to Shields UP! https://www.grc.com/x/ne.dll?bh0bkyd2
You then need to click on the button named “Proceed”.
Then go through all the Shields UP! tests, particularly the “All Service Ports” test
Well, 90$ later I am the ‘proud?’ owner of spinrite recovery software. Went to the shields up site and for free got the port check I wanted. I’m invisible!
Well, 90$ later I am the 'proud?' owner of spinrite recovery softwareI didn't know anything was missing? ;D ;D ;D