NEW version: Avast 17.5.2302

system · 2017-07-07T20:14:00.000Z

i have the same problem with https scanning. disabling it works fine.
It seems that the problem is in https pages
pg

janetofficeworker · 2017-07-08T22:45:32.000Z

Your 6/26/2017 update (Free Edition) no longer automatically runs a scheduled Quick Scan. Is this a known issue for 17.5.2302? Will/Can it be corrected? The previous version required same-day scheduling, but then at least I knew, time set for the day, it would run automatically, and that I could move on to other chores. I also noticed that your popup messages are inaccurate; the main one, which appears at the exact same time I’ve scheduled the QS to run, notifies me that the Quick Scan has completed its procedures and that no issues have been found. However, clicking the Details button reveals no details, but instead apparently launches the QS for its first run of the day, as confirmed by Scan History info. Of course, no telling if any Avast interactive tools really work, but at least my laptop is receiving sufficient security protection (so far, that is) – and for free! Security protection is, after all, my main objective in using AVAST – but I’m nonetheless hoping for a significantly (shall I say Vastly?) improved user interface. It’s way too crazy as is, way too weird. !

Thanks.

I’m on Windows 10, Compaq Presario CQ50-210US

–jjb

system · 2017-07-10T17:17:28.000Z

The latest version of Avast makes loading outlook.com (hotmail) on my laptop impossible, it blocks at auth.gfx;ms - with gmail it also goes incredibly slow and the gmail says there is something wrong with google.
When is reset my system to a prior date - everything runs smoothly.
When i reinstalled the latest version of Avast- same problem again
So it is clearly an avast issue
Can anyone help me out ?

Roel

bmarshall4 · 2017-07-10T17:26:35.000Z

My machine with vista home basic is deathly slow with this new version. I had to turn avast off to get my machine useable again.
All browsers but my main one is firefox.

thanks
brad

bob3160 · 2017-07-10T17:51:28.000Z

bmarshall4 post:160:

My machine with vista home basic is deathly slow with this new version. I had to turn avast off to get my machine useable again.
All browsers but my main one is firefox.

thanks
brad

Try the following:
Settings, Components, Webshield (Customize), Uncheck “Enable HTTPS scanning” then click on OK to save the change.

saturation · 2017-07-10T18:08:17.000Z

Hi

Have installed the new version.
Seems to run without causing problems so far.

Just tested Eventlog for error messages in Windows 7 Home premium after installation and noticed the following.

a. ) Clean event log, Shut down PC with Avast running
→ No error messages or warnings in event log after start.

b.) Bring PC in sleep modus (S3) when Avast running, then bring PC back in normal modus, ( no errors or warnings in Event log) then shut down PC.
→ After start I noticed Dcom system error message 10010 in the event log .
Der Server “{995C996E-D918-4A8C-A302-45719A6F4EA7}” konnte innerhalb des angegebenen Zeitabschnitts mit DCOM nicht registriert werden.
c. ) Same scenario as b.) but before shutdown “deactivate Avast until next start”.
After start no Dcom error.! Clean Event log. No errors or warnings.!

This event error is generated reproducabely in the scenario b.) on my system, but is not a problem.
if you see this error on your system and would like to prevent it either avoid S3 or just deactivate Avast before shutting down.

Regards

NVF · 2017-07-11T18:33:55.000Z

DavidR post:147:

There are topics in the forums that relate to people using Windows XP & Vista having connection problems. If you are using either of these OSes try un-checking the scan HTTPS sites in the Web Shield settings. You may be able to stop the scanning of https, reload the page and enable https scanning again.

Is there any good reason to update if I have Vista then?

Thanks

DavidR · 2017-07-11T19:18:33.000Z

NVF post:163:

DavidR post:147:

There are topics in the forums that relate to people using Windows XP & Vista having connection problems. If you are using either of these OSes try un-checking the scan HTTPS sites in the Web Shield settings. You may be able to stop the scanning of https, reload the page and enable https scanning again.

Is there any good reason to update if I have Vista then?

Thanks

There is always a good reason to update your security products if your system allows it, I still have XP Pro SP3, win7 Home 32bit and win10 Home 64bit, all of which have the latest avast version installed.

As I mentioned I haven’t been unduly effected by this issue so it doesn’t seem to happen across the all XP and Vista systems.

NVF · 2017-07-11T23:16:35.000Z

DavidR post:164:

I haven’t been unduly effected by this issue so it doesn’t seem to happen across the all XP and Vista systems.

Okay. Thanks for the reply.

system · 2017-07-13T12:49:16.000Z

Hi all,

I’ve been running Avast free version (17.5.2302) under Wndows 10 on a PC for six months with no problems. When running Smart Scan I’m used to getting the Performance Issue warning as this is a carrot to buy the full version. Today when I ran Smart Scan no virus etc were found but I got a Network issue warning. My PC is OK but I’m being told my router is not congifured properly and it mentions a “weak password found” (HNS_WEAK_PASS). Having turned the PC on and off a few times and re run Smart Scan I’m still getting the same warning. I’ve even run a Full Virus Scan and that shows up nothing. I’ve spoken to my internet provider and they say that it isn’t a router issue and could be a false positive or virus. I’ve tried to run Avast in Safe Mode but after a couple of minutes it comes up with an apology as it wont run.

Any advice would be gratefully appreciated.

bob3160 · 2017-07-13T12:58:38.000Z

zen16748 post:166:

Hi all,

I’ve been running Avast free version (17.5.2302) under Wndows 10 on a PC for six months with no problems. When running Smart Scan I’m used to getting the Performance Issue warning as this is a carrot to buy the full version. Today when I ran Smart Scan no virus etc were found but I got a Network issue warning. My PC is OK but I’m being told my router is not congifured properly and it mentions a “weak password found” (HNS_WEAK_PASS). Having turned the PC on and off a few times and re run Smart Scan I’m still getting the same warning. I’ve even run a Full Virus Scan and that shows up nothing. I’ve spoken to my internet provider and they say that it isn’t a router issue and could be a false positive or virus. I’ve tried to run Avast in Safe Mode but after a couple of minutes it comes up with an apology as it wont run.

Any advice would be gratefully appreciated.

Weak password usually means that the “default” password is still in use. Most of the time it’s your WiFi username and password
Change that to your own username and password and you shouldn’t get that message any more.
See if this helps you solve the problem:
https://www.howtogeek.com/233421/how-to-change-your-wifi-networks-name-and-password/

system · 2017-07-13T13:28:49.000Z

Hi Bob,

Thanks for the quick response. Sorry I should have mentioned that that being old scholl and having a small set up I have WiFi turned off. Does this mean that I would have to set my own username and password even though I have WiFI disabled? As I mentioned it seems odd that I only received this message today after using Avast for six months and this version for a couple of weeks.

Cheers.

bob3160 · 2017-07-13T13:32:00.000Z

zen16748 post:168:

Hi Bob,

Thanks for the quick response. Sorry I should have mentioned that that being old scholl and having a small set up I have WiFi turned off. Does this mean that I would have to set my own username and password even though I have WiFI disabled? As I mentioned it seems odd that I only received this message today after using Avast for six months and this version for a couple of weeks.

Cheers.

When you receive the message, have you clicked on the resolve button ??? If so where does it lead you ???

bob3160 · 2017-07-13T13:36:27.000Z

bob3160 post:169:

zen16748 post:168:

Hi Bob,

Thanks for the quick response. Sorry I should have mentioned that that being old scholl and having a small set up I have WiFi turned off. Does this mean that I would have to set my own username and password even though I have WiFI disabled? As I mentioned it seems odd that I only received this message today after using Avast for six months and this version for a couple of weeks.

Cheers.

When you receive the message, have you clicked on the resolve button ??? If so where does it lead you ???

Your problem could also stem from using the default username and p/w on the router.
If that’s the case take a look at the following slide from my current presentation and see if that helps:

http://screencast-o-matic.com/screenshots/u/Lh/1499952959834-49696.png

system · 2017-07-13T15:44:16.000Z

Hi Bob,

Thanks for the further info. I accessed my router, enabled WiFi, changed the name and password, applied it, made sure that the WiFi light on my router was on and then quickly turned the WiFi off. When I ran Smart Scan I got the same result. When the scan finishes, with the Network Issues and Perfomance Issues highlighted.

When I click the Resolve All button the first thing it shows is the Resoving Network Issues section. My devices, ie my desktop, is listed in green and pronunced as problem free. However, my router is listed in red and it says the device is not configured correctly. Below that is a red (horizontal) bar with white lettering which says “Weak service password found”. On the far right of this red bar is a small arrow which will toggle a description window.

The description starts:
A service on this device has a weak or default password. This is very dangerous situation, because factory-default usernames and passwords are often used by hackers and cybercriminals.

Catalogue ID HNS-WEAK-PASS

But I have only just noticed that the description window will scroll down, I’ve cut and pasted what follows as best I can:

Username: ●●●●●●●●Administrator
[note: this appers to be data entry box and toggles between a line of dots and Adminsitraor]

Password: ●●●●●●●●
[note: This box doesn’t seem to do much]

Details

Risks:

Attackers can access and control a service on this device.

Solutions

Change the access password for this service.

GO TO ROUTER SETTINGS
[note: This appears to be a link which I have not clicked.]

Is this a part of the usual Avast process or has my version of Avast been hacked and I’m being tempted to click a nasty button?

Regards & thanks,
Dave.

bob3160 · 2017-07-13T16:02:37.000Z

Avast isn’t hacked. Follow the advice.

system · 2017-07-14T15:24:31.000Z

I like the Ransomware Shield
Including it before WannaCry attack would be a great idea.

Asyn · 2017-07-14T17:07:59.000Z

TryIt post:173:

I like the Ransomware Shield
Including it before WannaCry attack would be a great idea.

Avast did protect you from WC via behavior shield.

system · 2017-07-15T13:34:46.000Z

Used Avast for years. Decided to buy the Internet Security and boy what a mistake. The firewall bans my browser/email program/Intel drivers/Nvidia drivers and MS drivers and programs from the internet. Since it is to late for a refund I guess I’ll just have to stick it out. But definitely will not be renewing. Just will stick with the free AV and use a different firewall.

bob3160 · 2017-07-15T13:44:12.000Z

atcsmike post:175:

Used Avast for years. Decided to buy the Internet Security and boy what a mistake. The firewall bans my browser/email program/Intel drivers/Nvidia drivers and MS drivers and programs from the internet. Since it is to late for a refund I guess I’ll just have to stick it out. But definitely will not be renewing. Just will stick with the free AV and use a different firewall.

Probably need to adjust the permission in the firewall.
If you’re using Windows 7 - 10, they come with an excellent firewall. No need for a third party firewall.

Announcements