After a System Recovery, I needed to remove the Norton that comes with the computer. After encountering other problems, I had to do a System Restore. This brought back Norton, but its uninstall function would not work. So, I proceeded to use the Norton Removal Tool that I had in my Flash Drive. It didn’t work. It said it wasn’t signed and thus wouldn’t open.
I downloaded another copy from FreewareFiles. I encountered several instances of Network Error and had to keep resuming the download. When it was done, it too said it wasn’t signed and thus wouldn’t open.
I then downloaded another copy from BleepingComputer, which was supposed to be from the author’s site. There too I encountered several instances of Network Error and had to keep resuming the download. When it was done, it too said it wasn’t signed and thus wouldn’t open.
What the blazes is going on? Why is downloading and getting the Norton Removal Tool to work such a pain in the …? And this isn’t the first time I’ve encountered this problem. In the past I’ve also had a very difficult time finding a copy that works.
Where do I get a copy that freakin’ works and that doesn’t throw out a Network Error fest during the download?
Personally I don’t think it’s the Norton tool that is the problem, the system restore is more like what has corrupted Norton or the system and now it cant be removed.
Your best bet would be to install Norton then remove it and if that fails a factory restore or new install from disc might be required.
Ahhh, okay then. That makes sense since yes, for starters this computer IS very problematic. And yes, yesterday’s System Recovery did not remotely go without incident. It took a million … okay, like a dozen attempts before one of them finally made it all the way through without the computer rebooting by itself in the middle of the recovery process.
Even my 2 attempts at installing SP2 did not succeed. I have 2 versions of SP2. The newer one is of course a bigger file size. Neither worked. So, you two are no doubt right. There is a problem with the Windows install.
I guess I can just manually remove everything Norton / Symantec that I find. I HAD already removed the registry entries with CCleaner, Glary Utilities and JetClean.
By the extra information you mentioned I’d agree completely with Eddy, something is definitely screwed up in the installation, hopefully it’s not Glary and JetClean making it worse ( ditch those two programs imo )
Oh, if it was any other computer I’d definitely just perform another Windows Reinstall cuz I would know there’d be a strong chance that everything would be fixed. However, this computer has been very problematic from when I first started using it sometime in 2013 … even down to performing the Windows Reinstalls themselves. They are NEVER routine or cake walk-like on this computer.
I’ve performed several since then and none leave the computer really any better than before the Windows Reinstall. I took it in for repair I believe early 2014, but it only worked properly for around 6 weeks before it went back to its old problems.
So basically, definitely Windows Reinstalls from the Factory partition are not the answer. And Windows repairs with Tweaking.com’s Windows Repair All in One only temporarily make it a little bit better, be it for a couple of hours or for a day or two.
THIS might possibly be the root cause:
Periodically among the many Blue Screen errors that I get, this bit of info is there:
“The BIOS in this system is not fully ACPI compliant. Please contact your system vendor for an updated BIOS.”
Is that something that can be fixed with a simple download of a BIOS file from the Compaq website and installed without the need for a Computer Geek Degree?
I’d add that if we know what os you are running, maybe a way to install clean without using the apparently corrupt recovery partition. If the make and model of your system is known, a link to the updated BIOS could be found, too. Updating the BIOS carries some risk, so is really a last resort, especially where the hardware may be suspect or intermittently failing. Static electricity discharges when not using a static wrist guard can result in hardware issues that are difficult to trace down.
I’d start by checking the health of the hard drive and go from there since the recovery partition should be intact and unchanged from date of creation. Check drive cables, capacitor condition, excessive heat, weak or failing PSU, etc.,.
As far as checking the hardware, Eddy, mchain … I had already tried that since back in 2013 when I was experiencing the problems from the get go of starting to use it. I ran the Windows Diags that come with the computer and nothing wrong was found. I then ran the Memtest86 Diags, which from what I read are supposed to be one of the if not the best Diags out there, at least as far as consumer versions go. Memtest86 appeared to be impressive-looking, but there too … nothing wrong was found with this computer’s hardware. Everything passed with flying colors.
Later on, I went as far as to take a big chance and installed 2 brand new 2 Gig RAM modules on the off chance that maybe it was some intermittent RAM problem that wasn’t being caught by the Diags. Well, that was indeed a big gamble that did not pay off. The computer didn’t get any better and I was now out more money than I cared to have tossed down the drain.
As far as what OS I am using? It’s there in my Siggy … Windows Vista Home Premium 32-Bit. The computer is a Compaq Presario SR5710y with an AMD Athlon 64 X2 4450e Processor.
I’ll see if any of the BSOD errors that I encounter today are remotely useful-looking.
Yeah, that sounds about right.
It’s not likely to be something that can be fixed on a forum.
The computer just needs to be retired … preferably dropped off of a very high cliff.
Thanks, guys. I’ll kick it to the curb and get a replacement as soon as I can.
very problematic from when I first started using it sometime in 2013
Depending on where you live, it may be that you still have warranty on it. Checking for it only takes a little of your time.
http://h20564.www2.hp.com/hpsc/wc/public/home
Not only check on that webpage, but also check your local laws.
It happens a lot that suppliers/manufacturers say there is no warranty but that the law says otherwise.
Always check hardware first. If known good, then go to software issues. Could still be under warranty. If so, back up personal data and return RMA and wait for new. I’d go as far as removing all personal data.
Oh, I didn’t mean to imply that I acquired this computer brand new around that 2013 time. That is when my oldest sister let me use it. She and her husband had already had it in storage for about 1½ years when they were out of the country. And they had already used it for some years before that. So, it’s not exactly new.
Out of curiosity, I decided to go through the motions of checking out the warranty status in that HP Support Center site. Wooooo! It turns out it’s actually older than I even thought it was. It claims on there that the warranty began on May 11, 2009 and ended on September 2, 2009 … as a Refurbished computer. Hmmm … I wasn’t even aware my sister and her husband bought it as a refurbished computer. I could be wrong, but somehow I don’t think they knowingly bought it as such. I’ll have to e-mail my sister and check to see if they indeed did knowingly buy this computer as a refurbished computer.
Thanks for that link to the HP Support Center Warranty Status Checking page, Eddy. It’s a good one to have. I already bookmarked it.
Ok, it is very clear there is no warranty on the system.
At least you have found out a little more about the history of that system.
It would not surprise me that the system was refurbished because of the same problems as you have with it.
Without having seen/tested the system myself, I would say the motherboard is broken.
Perhaps a idea to take out all other components and sell them.
Since the psu is supplying power…
You could use it to power several fans and place them on your desk on hot days to cool you
