Possible virus after clicking on Malwarebytes program update popup

Pondus · 2015-03-26T07:04:01.000Z

I do have this laptop and an iPad that are OK.

good .....

first install MCShield on your lappy http://www.mcshield.net

then see instructions here https://forum.avast.com/index.php?topic=53253.0
download Farbar Recovery Scan Tool on your lappy, then move it over with a USB stick, run as instructed, move the two logs back to the lappy and attach here

system · 2015-03-26T19:19:43.000Z

Thanks Pondus! Should I also install mcshield on my infected PC too?
Do I need it in my laptop if I have malwarebytes premium too?

Pondus · 2015-03-26T19:23:50.000Z

jokera post:3:

Thanks Pondus! Should I also install mcshield on my infected PC too?
Do I need it in my laptop if I have malwarebytes premium too?

It is recomended to have on all computers. This is a special scanner that protect against malware that use removable drives to spread
it is a install on forget tool, it use no recours except for when you plug in a USB device and it scan for a few seconds

lots of info / reviews on MCShield website

system · 2015-03-26T19:34:08.000Z

Hi Pondus, I plugged in the USB on my PC, but it won’t open. I can not either open anything on the Start menu, I can not even shut down or use Sleep on it, It won’t respond.
Should I just turn off the PC by pressing the power button and see what happens? and then once restarted try again or shutting it down will make it worse?
I am thinking that maybe Vista is frozen , but I can open some stuff like IE, Avast ( even thou the scanning stops at 19%, it won’t go further) also Windows update opens up, but if click on the USB or Start menu, there is no response, can not open Google either…
Avast safe Zone does not open either…
I just tried running a quick scan with Avast, the screen went black, then all white and it says Avast is not resppnding… all the screen is white with light blue borders around it

essexboy · 2015-03-26T20:33:36.000Z

What version of windows do you have and is it 32 or 64 bit ?

system · 2015-03-26T21:14:48.000Z

Hi Essexboy! The computer infected is a Dell, Windows Vista, had at the time of possible infection Malwarebytes Premium and Avast Premier 2015. I can not remeber if is 32 0r 64 and at the moment I can not check that as the screen continues to be for the last 2 hours all white with light blue border and the mousse symbol is circling continuosly…
Should I turn it off and on manually by pressing the Power button? it has been on since yesterday…

essexboy · 2015-03-26T21:36:22.000Z

Yes turn it off I will give links for both 32 and 64 bit, but try 32 bit first. Links sent by PM

Download the following three programmes to your desktop :

Rufus

For 64bit systems
2. Windows Vista 64bit RC
3. Farbar Recovery Scan Tool x64

For 32bit systems
2. Windows Vista RC
3. Farbar Recovery Scan Tool

Insert the USB stick Then run Rufus

https://dl.dropbox.com/u/73555776/rufus.JPG

Select the ISO file on the desktop via the ISO icon.

Press Start Burn

https://dl.dropbox.com/u/73555776/RufusISO.JPG

Then copy FRST to the same USB

http://dl.dropbox.com/u/73555776/frstwintoboot.JPG

Insert the USB into the sick computer and start the computer. First ensuring that the system is set to boot from USB
Note: If you are not sure how to do that follow the instructions Here

Windows 7 and Vista screenshots

When you reboot you will see this.
Click repair my computer

http://i1224.photobucket.com/albums/ee362/Essexboy3/RepairVista_7275.jpg

Select your operating system

http://i1224.photobucket.com/albums/ee362/Essexboy3/RepairVista_7277202.jpg

Select Command prompt

http://i1224.photobucket.com/albums/ee362/Essexboy3/RepairVista_7277.jpg

At the command prompt type the following :

notepad and press Enter.
The notepad opens. Under File menu select Open.
Select “Computer” and find your flash drive letter and close the notepad.
In the command window type e:\frst64.exe or e:\frst.exe dependant on system
and press Enter
Note: Replace letter e with the drive letter of your flash drive.
The tool will start to run.
When the tool opens click Yes to disclaimer.

https://dl.dropboxusercontent.com/u/73555776/frst.JPG

Press Scan button.
It will make a log (FRST.txt) on the flash drive. Please copy and paste it to your reply.

system · 2015-03-26T21:49:59.000Z

Thanks! I will do that. Is it safe to reinsert the USB I have already inserted on my contminated PC, on my laptop again or should I get a new one?

essexboy · 2015-03-26T22:03:18.000Z

No need for a fresh one as Rufus will wipe the drive before it copies the boot data to it

system · 2015-03-26T22:08:18.000Z

OK! should I use:
Rufus 2.1 (788 KB) or
Rufus 2.1 Portable (788 KB)

system · 2015-03-26T22:14:17.000Z

when I inseted the USB on my laptop, MCShield run and said it was infected, but stopped it. This is what the note pad showed in case it helps:

MCShield ::Anti-Malware Tool:: http://www.mcshield.net/

v 3.0.5.28 / DB: 2015.3.23.1 / Windows 7 <<<

3/26/2015 3:10:30 PM > Drive E: - scan started (KINGSTON ~15262 MB, FAT32 flash drive )…

E:\autorun.inf > Legitimate file.

Resetting attributes: E:\urDrive < Successful.

=> Hidden folders : 1/1 unhidden.

::::: Scan duration: 15sec :::::::::::::::::

system · 2015-03-26T22:23:25.000Z

I used the Rufus Portable, as the other did not work…

system · 2015-03-26T22:49:32.000Z

Hi, I used the Rufus portable download and pressed start and this is what showed up - attached file for Rufus screen shot and warning screenshot. Even thou I made sure it looks like the screnn shot you sent me…
Should I uncheck : Create a bootable disk…
and press start again?
I am confused…

I do not see : Select the ISO file on the desktop via the ISO icon.
As I do not see any ISO on my desktop… where will it be…?

So I guess I am stuck on the warning showed in attachment Rufus 5, as I have no idea of what to do next…
So sorry that I am so inexperienced with this stuff… it is probably simple. but…

essexboy · 2015-03-27T12:35:23.000Z

Insert the USB stick Then run Rufus

https://dl.dropboxusercontent.com/u/73555776/RufusISO.JPG

Select the ISO file on the desktop via the ISO icon.

Click the ISO image button and select the Vista RC that you downloaded to your desktop then press burn

system · 2015-03-28T00:22:55.000Z

Hi!

system · 2015-03-28T02:36:37.000Z

Hi Essexboy!
here is the log
Thanks fo ryour help…

essexboy · 2015-03-28T11:35:18.000Z

Nothing really jumps out at me there, so I will remove a few entries that are possible causes and reset the network

Download the attached Fixlist.txt to the same location as FRST (USB)
Start FRST as before and press fix
Once it has completed reboot to normal windows and try a download again

system · 2015-03-28T17:39:27.000Z

Hi Essexboy, I followed your instructions and the computer is now working great! Better than in a very long time ;D
I am very grateful once more for your help…
I will like to ask you a favor, if you could please look at the attached log from my laptop after running the Farbar Recovery Tool program, as this laptop is not working very well and stalling a lot for a while now. I have tried other tools but nothing seems to help. I was wondering in the Frst tool will show something I can improve it.
I am sorry if it is too much to ask after how busy you must be…
Thank you so much for all the help you give to all of us here…
Wishing you the best to you and your family…

essexboy · 2015-03-28T17:46:43.000Z

Glad the main computer is now OK

Let me know if this helps the laptop
CAUTION : This fix is only valid for this specific machine, using it on another may break your computer

Open notepad and copy/paste the text in the quotebox below into it:

CreateRestorePoint: CHR HKLM\SOFTWARE\Policies\Google: Policy restriction <======= ATTENTION CHR HKU\S-1-5-21-1442282352-1916392805-3601698020-1001\SOFTWARE\Policies\Google: Policy restriction <======= ATTENTION BHO: Java(tm) Plug-In 2 SSV Helper -> {DBC80044-A445-435b-BC74-9C25C1C588A9} -> C:\Program Files\Java\jre6\bin\jp2ssv.dll No File BHO-x32: No Name -> {18DF081C-E8AD-4283-A596-FA578C2EBDC3} -> No File Toolbar: HKLM - No Name - {CC1A175A-E45B-41ED-A30C-C9B1D7A0C02F} - No File Toolbar: HKU\S-1-5-21-1442282352-1916392805-3601698020-1001 -> No Name - {21FA44EF-376D-4D53-9B0F-8A89D3229068} - No File 2015-03-03 14:44 - 2015-03-03 14:44 - 00000000 __SHD () C:\Users\Anjana\AppData\Local\EmieBrowserModeList 2011-06-21 15:03 - 2011-06-21 15:03 - 0000000 _____ () C:\Users\Anjana\AppData\Local\{1D3BE3F2-AAFE-4F6E-A363-7778C8B0B62D} 2011-07-06 21:23 - 2011-07-06 21:23 - 0000000 _____ () C:\Users\Anjana\AppData\Local\{B9D37718-0FD9-47E0-8C12-943635DCCFEF} Reg: reg delete HKLM\SOFTWARE\Policies\Microsoft\Windows\IPSec\Policy\Local /f Reg: reg add HKLM\SOFTWARE\Policies\Microsoft\Windows\IPSec\Policy\Local /f RemoveProxy: EmptyTemp: CMD: bitsadmin /reset /allusers

Save this as fixlist.txt, in the same location as FRST.exe

https://dl.dropboxusercontent.com/u/73555776/FRSTfix.JPG

Run FRST and press Fix
On completion a log will be generated please post that

system · 2015-03-28T18:28:18.000Z

Thanks !
Here is the log…

Announcements