I’ve been on dialup since Noah was a pup, and have my avast update connection set to dialup-only accordingly.
Any millenium now, I intend to upgrade to DSL with a router. I intend shutting that down and in effect disconnecting, when I’m not active online.
What’s the proper update setting for that situation? I won’t be always connected, but neither will I be on dialup.
Actually I think I’ve already worked out the answer myself, but confirmation from someone who’s “been there” would be nice. If always-connected checks for accessibility of the servers by pinging, that’s probably the way to go, right?
Use the dial-up behavior is my suggestion. It’s just a setting to inform avast how to ping the servers for an update.
Remember Mike that you can configure how many seconds, after being connected, you want avast to update. Just check avast4.ini file thread.
Yes, the dial up option checks for a connection before pinging the server… 8)
Thanks, Tech, but I think we got our communications confused a little.
Unless there’s been a change in one of the more recent version-upgrades, it was my understanding that Always-connected pings to check, while Dialup-only simply checks the modem status.
And I would assume that my modem would be always on and functional (while the computer is, that is), even if the router’s off and won’t let it communicate, so a modem status-check wouldn’t help. On the other hand, using the Always-connected setting would yield unresponsive ping attempts, which is (I think) what I’d want, to let the updater know it couldn’t connect at that time.
I find myself completely amazed by Tech’s recommendation … since I cannot understand the logic of it.
However, always willing, I am now running my system with Tech’s recommendation.
I have a cable modem and router (no different from DSL modem and router). At startup avast has completely failed to perform any check for updates (that is standard for startup in an always connected system) and we will see how it goes.
Setting as using a dial-up, avast checks if there is an available connection each 40 seconds.
If there isn’t, wait more 40 seconds to check. Checking does not take more than one second and, of course, does not use the Internet band as it’s a local check.
If you’re using a permanent connection, avast pings the server after the time specified in avast4.ini file and then each 40 seconds looking for an update at the server. If there is not any new file to download, wait 4 hours to start checking again. If there is an available update, start it and install it. Again, wait 4 hours to check the next time.
I suggest you use the permanent connected option and not the dial-up one.
Mike wants to disconnect his computer, and you don’t (as far I know).
I believe that is why Alan is doing it to test the theory that with (broadband/cable) an always connected Internet if it is set to dial-up then auto updates won’t happen (period, not just that when MikeBCda goes off-line) as there is no modem present.
Effectively turning it to Manual Update as there would never be a modem response.
That unfortunately I don’t think that will achieve what MikeBCda is hoping to do, as that would continue to attempt pinging to check the connection status.
My guess MikeBCda has alternative reasons for shutting down his DSL router, he wants to stop anything connecting to the internet or having inbound access and at the same time stop avast checking for updates whilst he is off-line.
In the past Mike has posted about getting the Red Update failure notice and I also guess he is thinking if avast checks for updates but his system is off-line it will fail and display the Red Update error box.
Just my guess as to why he wants to do this ?
Any millenium now, I intend to upgrade to DSL with a router. I intend shutting that down and in effect disconnecting, when I'm not active online.
What’s the proper update setting for that situation? I won’t be always connected, but neither will I be on dialup.
If a system is running with a permanent broadband connection then:
With the “Dial-up” modem option checked and
With the “Always connected” option unchecked
avast will never check for automatic updates.
When I then unchecked the “Dial-up modem” option (and left both options unchecked as calcu007 does) then within one minute avast performed a check for automatic updates and installed the latest VPS update.
So it seemed that this setup (as calcu007 has) would be good for MikeBCda. Like David I thought that this might provoke the “red flag” popup.
I cannot turn off my modem since it also carries my phone service and I am awaiting calls. However I just disconnected this system from the router and restarted it.
With both options unchecked and my system disconnected I did not get a “red flag” at startup.
Later edit:
With just the “Always connected” option checked and my system disconnected from the router I did get a “red flag” popup as system startup.
So unless anyone wants to do so more testing I would advise MikeBCda to go with the same settings a calcu007 and leave both boxes unchecked when his broadband millennium arrives.
Me too. I never played with it, but I always assumed that one box or the other had to be ticked, and “neither” (that is, neither box) wasn’t an option.
I think that no box (or both boxes) ticked is the default option as avast doesn’t know what your connection might be, so both ticked or neither ticked would allow for one or the other to work.