Hmm … that’s odd.
[*]Save it to your desktop
[*]Right click on it an run it as Administrator
Re-run FRST as you did before and attach here fresh FRST.txt logreport.
…and just for test, try to run zoek now using this script:
filesrcm;
startupall;
firefoxlook;
chromelook;
Things are getting weirder O.O I tried opening zoek.exe instead what was opened was GaussView - program for visualizng chemical molecules from the results of computer calculations O.O (GaussView opens *.log files usually but not *.exe files)
Ok, i see where is the problem.
Please download Malwarebytes AntiRootkit and save it to your desktop.
http://www.malwarebytes.org/products/mbar/
Full instructions how to use MBAR
http://www.bleepingcomputer.com/virus-removal/how-to-use-malwarebytes-anti-rootkit
Please note: This is a beta version so please be sure to read the disclaimer and note of it.
[*] Unzip/unrar MBAR in a folder to your Desktop
[*] Open the folder where the contents were unzipped to run mbar.exe
[*] Click on Next > then on Update button to download fresh definitions.
[*] When database updates click Next
[*] In the following window ensure “Targets” scan for Drivers; Sectors; System are ticked. Then select “Scan button”
[*] If an infection/s are found ensure “Create Restore Point” is checked, then select the “Cleanup Button” to remove threats.
Or if you are sure any entries should not be kept, just untick them. A list of infected files will be listed.
[*] The Clean up procedure will be Scheduled for process.
[*] When complete pop-up will show you. Select the Yes button and the system should re-boot to complete the cleaning process.
Please attach the two following logs from the mbar folder:
system-log.txt
and
mbar-log-year-month-day (hour-minute-second).txt.
========== Next ===========
Re-run FRST and attach here fresh FRST.txt log
Ready
I’ll be away from my computer for about 12 hours. Thank you for the help and I hope tomorrow we can finish the fight! Again thanks a lot! ^^
NOTICE: This script was written specifically for this user, for use on that particular machine. Running this on another machine may cause damage to the operating system
FF user.js: detected! => C:\Users\Lenovo\AppData\Roaming\Mozilla\Firefox\Profiles\v0nstdya.default\user.js
HKCU\...\Run: [ee] C:\Users\Lenovo\AppData\Roaming\f81\ee.js [x]
C:\Users\Lenovo\AppData\Roaming\f81\*.js
C:\Users\Lenovo\AppData\Roaming\f81
MountPoints2: {15998a67-702c-11e2-9654-9439e59642f7} - F:\install.exe
C:\f9955
C:\Program Files\e71
Save notepad as fixlist.txt
NOTE. It’s important that both files, FRST and fixlist.txt are in the same location or the fix will not work.
Run FRST/FRST64 and press the Fix button just once and wait.
If the tool needed a restart please make sure you let the system to restart normally and let the tool completes its run after restart.
The tool will make a log on the Desktop (Fixlog.txt). Please attach it to your reply.
Note: If the tool warned you about the outdated version please download and run the updated version.
======== Next ===========
C:\Users\Lenovo\Desktop\OTL.exe
Run OTL, just click on RunScan and attach here OTL.txt logreport.
======== Next ===========
Check USB storage devices / removable drives
Download MCShield from one of the following links:
MyCity - Official download link
Softpedija - Mirror download link
[*] Double click MCShield-Setup to install the application.
[*] Wait a few seconds to MCShield finish initial scan.
Recommendation to under General and Scanner tab you click on Defaults button to choose recommended options.
[*] Connect your USB storage devices to the computer one at a time. Scanning will be done automatically.
When all scanning is done, you need to attach a logreport that has made MCShield.
Start → All Programs → MCShield → Logs
Attach here → AllScans.txt
Explanation: USB storage devices are all the USB devices that get their own partition letter at connecting to the PC,
e.g. flash drives (thumb/pen drives, USB sticks), external HDDs, MP3/MP4 players, digital cameras,
memory cards (SD cards, Sony Memory Stick, MultiMedia Cards etc.), some mobile phones, some GPS navigation devices etc.
I installed Mcsheiald yesterday and ran a scan on my flash drive should I re-run the scan? Are there different options when I do the second scan?
anyway I just plugged my USB then unplugged then plugged the next one and I’m sending the report.
I installed Mcsheiald yesterday and ran a scan on my flash drive...My bad. :)
Restart your computer and re-run OTL and attach here fresh OTL.txt logreport.
Infection and re-infections has come from USB memory storage devices. MCShield need to be active to remove the malware and protect your computer from worms coming through USB.
Done!
Re-run OTL.exe.
[*]Copy and paste the following text written inside of the quote box into the Custom Scans/Fixes box.
:OTL
CHR - Extension: No name found = C:\Users\Lenovo\AppData\Local\Google\Chrome\User Data\Default\Extensions\aohghmighlieiainnegkcijnfilokake\0.0.0.6_0\
CHR - Extension: No name found = C:\Users\Lenovo\AppData\Local\Google\Chrome\User Data\Default\Extensions\apdfllckaahabafndbhieahigkjlhalf\6.2_0\
CHR - Extension: No name found = C:\Users\Lenovo\AppData\Local\Google\Chrome\User Data\Default\Extensions\blpcfgokakmgnkcojhhkbfbldkacnbeo\4.2.5_0\
CHR - Extension: No name found = C:\Users\Lenovo\AppData\Local\Google\Chrome\User Data\Default\Extensions\coobgpohoikkiipiblmjeljniedjpjpf\0.0.0.19_0\
CHR - Extension: No name found = C:\Users\Lenovo\AppData\Local\Google\Chrome\User Data\Default\Extensions\efaidnbmnnnibpcajpcglclefindmkaj\11.0.0.379_0\
CHR - Extension: No name found = C:\Users\Lenovo\AppData\Local\Google\Chrome\User Data\Default\Extensions\mhkaekfpcppmmioggniknbnbdbcigpkk\2.3_0\
CHR - Extension: No name found = C:\Users\Lenovo\AppData\Local\Google\Chrome\User Data\Default\Extensions\pjkljhegncpnkpknbcohdijeoejaedia\7_0\
O32 - AutoRun File - [2009/07/29 12:54:20 | 000,000,031 | R--- | M] () - F:\autorun.inf -- [ CDFS ]
O33 - MountPoints2\{15998a67-702c-11e2-9654-9439e59642f7}\Shell - "" = AutoRun
O33 - MountPoints2\{15998a67-702c-11e2-9654-9439e59642f7}\Shell\AutoRun\command - "" = F:\install.exe -- [2009/07/29 12:54:20 | 000,947,560 | R--- | M] (CambridgeSoft)
O33 - MountPoints2\{9f2a5548-2601-11e1-85c0-806e6f6e6963}\Shell - "" = AutoRun
@Alternate Data Stream - 174 bytes -> C:\ProgramData\Temp:1CE11B51
:files
ipconfig /flushdns /c
:commands
[CREATERESTOREPOINT]
[emptytemp]
[*]Then click the Run Fix button at the top.
[*]Let the program run unhindered; it will reboot the system when it is done and open notepad with logreport. Attach here that logreport.
How is your computer running now?
Ok I think I did it. again the log report is called OTL right? Here!
That’s good. You didn;t tell me, is your computer running fine now?
yeah it’s bettter. After yesterday avast stopped givng me the constant messages. I still can’t open my control panel though 
What happend when you click on Control Panel?
Let’s try again to run Combofix now. It have nice hidden tools for fixing varius malware related damage.
Delete old Combofix ( drag & drop into recycle.bin )
Download ComboFix from here and save it to your Desktop.
If you are unsure how ComboFix works please read this guide carefully.
note: ComboFix must be downloaded to your Desktop.
Temporarily disable your AntiVirus program.
If you are unsure how to do this please read this or this Instruction.
How to disable avast:
[*]Right-click on the avast! icon in the lower right corner of the screen and choose Open Avast! User Interface.
[*]In the window that opens on the top right corner, click Settings.
[*]In a new window that opens, choose the option Troubleshooting, Uncheck Enable avast! self-defense, and click OK.
[*]Right-click on the avast! icon in the lower right corner of the screen and select avast! shield controls .
[*]In the menu that appears, choose Disable Permanently. When you are prompted to turn off security, click Yes.
Note: Do not forget to turn on this option after the cleaning.
Run ComboFix. Click on I Agree!
ComboFix will check if there is a newer version of ComboFix available.
Click Yes if prompted to download.
ComboFix will display DISCLAIMER OF WARRANTY ON SOFTWARE.
Click Yes to allow ComboFix to continue.
If Recovery Console is not installed, ComboFix will offer download & installation.
Click Yes to allow ComboFix to install Recovery Console.
Note:Do not mouse-click Combofix’s window while it is running.
If you see a message like “Illegal operation attempted on a registry key that has been marked for deletion” just restart computer once more.
When the tool is finished, it will produce a log report for you. (typical location: C:[b]ComboFix.txt[/b] )
Attach log reports ( ComboFix.txt) back to topic.
Let try to repair you system;
Please download Windows Repair (all in one) from here:
http://www.tweaking.com/content/page/windows_repair_all_in_one.html
[*] Install the program then run.
[*] Go to Step 2 and allow it to run Disk check
[*] Once that is done then go to Step 3 and allow it to run SFC
[*] Go to Step4 and create registry backup and system restore point.
[*] On the Start Repairs tab => Click the Start
[*] Restart may be needed to finish the repair procedure.
something weird happend after i ran system recovery point on Windows Repair
I ran first ComboFix and after that I regained access to my Control Panel (it was no longer blank). Then I installed the Windows Repair and ran steps 2 and 3 as instructed. When I ran the System restore point part of step 4 it’s like I turned my clock backwards with one day all the changes - downloaded files, installed programms including the combofix log which has been on my computer for less then a day is gone. What should I do?
oh, and again my Control Panel is blank… :-\ Is it possible for it to hav also undone the changes we made with OTL?
Yes…dude… you haven’t create a new restore point. You have run your system in old existsing point ( like back in time into past ), so you have restore your computer to the state when computer was malfunctioning and infected.
Download ComboFix … again ( ;D ) and re-run it. If it fails to run try several times always with a fresh Combofix.exe copy.
Attach here Combofix.txt log.
haha was that supposed to happen? And should I be worried about the infected part? XD
I’m ready with ComboFix! ^^
CFScript for Combofix
Open notepad and copy/paste the text present inside the code box below:
ClearJavaCache::
DirLook::
c:\programdata\USBSecurity
c:\users\Lenovo\AppData\Roaming\SSH
RegLock::
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\{73C9DFA0-750D-11E1-B0C4-0800200C9A66}]
@Denied: (A 2) (Everyone)
@="FlashBroker"
"LocalizedString"="@c:\\Windows\\system32\\Macromed\\Flash\\FlashUtil64_11_7_700_224_ActiveX.exe,-101"
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\{73C9DFA0-750D-11E1-B0C4-0800200C9A66}\Elevation]
"Enabled"=dword:00000001
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\{73C9DFA0-750D-11E1-B0C4-0800200C9A66}\LocalServer32]
@="c:\\Windows\\system32\\Macromed\\Flash\\FlashUtil64_11_7_700_224_ActiveX.exe"
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\{73C9DFA0-750D-11E1-B0C4-0800200C9A66}\TypeLib]
@="{FAB3E735-69C7-453B-A446-B6823C6DF1C9}"
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Interface\{6AE38AE0-750C-11E1-B0C4-0800200C9A66}]
@Denied: (A 2) (Everyone)
@="IFlashBroker5"
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Interface\{6AE38AE0-750C-11E1-B0C4-0800200C9A66}\ProxyStubClsid32]
@="{00020424-0000-0000-C000-000000000046}"
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Interface\{6AE38AE0-750C-11E1-B0C4-0800200C9A66}\TypeLib]
@="{FAB3E735-69C7-453B-A446-B6823C6DF1C9}"
"Version"="1.0"
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Wow6432Node\CLSID\{73C9DFA0-750D-11E1-B0C4-0800200C9A66}]
@Denied: (A 2) (Everyone)
@="FlashBroker"
"LocalizedString"="@c:\\Windows\\SysWOW64\\Macromed\\Flash\\FlashUtil32_11_7_700_224_ActiveX.exe,-101"
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Wow6432Node\CLSID\{73C9DFA0-750D-11E1-B0C4-0800200C9A66}\Elevation]
"Enabled"=dword:00000001
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Wow6432Node\CLSID\{73C9DFA0-750D-11E1-B0C4-0800200C9A66}\LocalServer32]
@="c:\\Windows\\SysWOW64\\Macromed\\Flash\\FlashUtil32_11_7_700_224_ActiveX.exe"
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Wow6432Node\CLSID\{73C9DFA0-750D-11E1-B0C4-0800200C9A66}\TypeLib]
@="{FAB3E735-69C7-453B-A446-B6823C6DF1C9}"
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Wow6432Node\CLSID\{D27CDB6E-AE6D-11cf-96B8-444553540000}]
@Denied: (A 2) (Everyone)
@="Shockwave Flash Object"
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Wow6432Node\CLSID\{D27CDB6E-AE6D-11cf-96B8-444553540000}\InprocServer32]
@="c:\\Windows\\SysWOW64\\Macromed\\Flash\\Flash32_11_7_700_224.ocx"
"ThreadingModel"="Apartment"
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Wow6432Node\CLSID\{D27CDB6E-AE6D-11cf-96B8-444553540000}\MiscStatus]
@="0"
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Wow6432Node\CLSID\{D27CDB6E-AE6D-11cf-96B8-444553540000}\ProgID]
@="ShockwaveFlash.ShockwaveFlash.11"
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Wow6432Node\CLSID\{D27CDB6E-AE6D-11cf-96B8-444553540000}\ToolboxBitmap32]
@="c:\\Windows\\SysWOW64\\Macromed\\Flash\\Flash32_11_7_700_224.ocx, 1"
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Wow6432Node\CLSID\{D27CDB6E-AE6D-11cf-96B8-444553540000}\TypeLib]
@="{D27CDB6B-AE6D-11cf-96B8-444553540000}"
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Wow6432Node\CLSID\{D27CDB6E-AE6D-11cf-96B8-444553540000}\Version]
@="1.0"
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Wow6432Node\CLSID\{D27CDB6E-AE6D-11cf-96B8-444553540000}\VersionIndependentProgID]
@="ShockwaveFlash.ShockwaveFlash"
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Wow6432Node\CLSID\{D27CDB70-AE6D-11cf-96B8-444553540000}]
@Denied: (A 2) (Everyone)
@="Macromedia Flash Factory Object"
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Wow6432Node\CLSID\{D27CDB70-AE6D-11cf-96B8-444553540000}\InprocServer32]
@="c:\\Windows\\SysWOW64\\Macromed\\Flash\\Flash32_11_7_700_224.ocx"
"ThreadingModel"="Apartment"
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Wow6432Node\CLSID\{D27CDB70-AE6D-11cf-96B8-444553540000}\ProgID]
@="FlashFactory.FlashFactory.1"
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Wow6432Node\CLSID\{D27CDB70-AE6D-11cf-96B8-444553540000}\ToolboxBitmap32]
@="c:\\Windows\\SysWOW64\\Macromed\\Flash\\Flash32_11_7_700_224.ocx, 1"
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Wow6432Node\CLSID\{D27CDB70-AE6D-11cf-96B8-444553540000}\TypeLib]
@="{D27CDB6B-AE6D-11cf-96B8-444553540000}"
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Wow6432Node\CLSID\{D27CDB70-AE6D-11cf-96B8-444553540000}\Version]
@="1.0"
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Wow6432Node\CLSID\{D27CDB70-AE6D-11cf-96B8-444553540000}\VersionIndependentProgID]
@="FlashFactory.FlashFactory"
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Wow6432Node\Interface\{6AE38AE0-750C-11E1-B0C4-0800200C9A66}]
@Denied: (A 2) (Everyone)
@="IFlashBroker5"
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Wow6432Node\Interface\{6AE38AE0-750C-11E1-B0C4-0800200C9A66}\ProxyStubClsid32]
@="{00020424-0000-0000-C000-000000000046}"
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Wow6432Node\Interface\{6AE38AE0-750C-11E1-B0C4-0800200C9A66}\TypeLib]
@="{FAB3E735-69C7-453B-A446-B6823C6DF1C9}"
"Version"="1.0"
[HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\PCW\Security]
@Denied: (Full) (Everyone)
Save this as CFScript.txt
http://img.photobucket.com/albums/v666/sUBs/CFScriptB-4.gif
Close all browser windows and refering to the picture above.
Referring to the screenshot above, drag CFScript.txt into ComboFix.exe.
ComboFix will will re-run. When finished, it will produce a log for you.
Attach the contents of the log in your next reply. (typical location: C:[b]ComboFix.txt[/b] )
Re-check with Zoek:
Please download zoek.exe and save it to your desktop.
[*] Close any open browsers.
[*] Temporarily disable your AntiVirus program. (If necessary)
If you are unsure how to do this please read this or this Instruction.
[*] Double click on zoek.exe to run the tool .
Please wait while the tool does not start…
[*] Copy the text present inside the code box below and paste it into the large window in the zoek tool:
installedprogs;
filesrcm;
startupall;
firefoxlook;
chromelook;
[*] Click on
http://www.mcshield.net/personal/magna86/Images/Run%20Script%20by%20zoek.png
button
Please wait until a logreport will open (this can be after reboot)
[*] Save notepad to your Desktop and attach here zoek-results.log
Note: It will also create a log in the C:\ directory named “zoek-results.log”