[*]Under the Custom Scans/Fixes box at the bottom, paste in the following
:OTL
O3 - HKLM\..\Toolbar: (no name) - {CCC7A320-B3CA-4199-B1A6-9F516DD69829} - No CLSID value found.
O3 - HKCU\..\Toolbar\WebBrowser: (no name) - {CCC7A320-B3CA-4199-B1A6-9F516DD69829} - No CLSID value found.
O33 - MountPoints2\{f00b06dd-487b-11de-a663-001d92afd897}\Shell\Auto\command - "" = printer.exe
:Commands
[resethosts]
[purity]
[emptytemp]
[EMPTYFLASH]
[Reboot]
[*]Then click the Run Fix button at the top
[*]Let the program run unhindered, reboot the PC when it is done
[*]Open OTL again and click the Quick Scan button. Post the log it produces in your next reply.
[*] If it gives you a warning about rootkit activity and asks if you want to run a full scan…click on NO, then use the following settings for a more complete scan…
[*] In the right panel, you will see several boxes that have been checked. Ensure the following are UNCHECKED …
[] IAT/EAT
[] Drives/Partition other than Systemdrive (typically C:)
[*] Show All (don’t miss this one)
http://www.geekstogo.com/misc/guide_icons/GMER_thumb.jpg
Click the image to enlarge it
[*] Then click the Scan button & wait for it to finish.
[*] Once done click on the [Save…] button, and in the File name area, type in “ark.txt”
[*]Save the log where you can easily find it, such as your desktop. CautionRootkit scans often produce false positives. Do NOT take any action on any “<— ROOKIT” entries
Please copy and paste the report into your Post.
Do you use a USB drive with this computer ? As a mountpoint I removed has reset itself. On completion of this run can you let me know what problems you are having
Run OTL
[*]Under the Custom Scans/Fixes box at the bottom, paste in the following
[*]Then click the Run Fix button at the top
[*]Let the program run unhindered, reboot the PC when it is done
[*]Open OTL again and click the Quick Scan button. Post the log it produces in your next reply.
Double Click mbam-setup.exe to install the application.
[*]Make sure a checkmark is placed next to Update Malwarebytes’ Anti-Malware and Launch Malwarebytes’ Anti-Malware, then click Finish.
[*]If an update is found, it will download and install the latest version.
[*]Once the program has loaded, select “Perform Quick Scan”, then click Scan.
[*]The scan may take some time to finish,so please be patient.
[*]When the scan is complete, click OK, then Show Results to view the results.
[*]Make sure that everything is checked, and click Remove Selected.
[]When disinfection is completed, a log will open in Notepad and you may be prompted to Restart.(See Extra Note)
[]The log is automatically saved by MBAM and can be viewed by clicking the Logs tab in MBAM.
[*]Copy&Paste the entire report in your next reply.
Extra Note:
If MBAM encounters a file that is difficult to remove,you will be presented with 1 of 2 prompts,click OK to either and let MBAM proceed with the disinfection process. If asked to restart the computer, please do so immediately.